Links
Toggle Nav
Advanced Search

CALL US NOW

+353 01 801 1335

Cart 0 Shopping Cart
Menu
Account
Suppliers of Survey & Engineering Instruments
main product photo
Loading...

Elcometer 106 Pull Off Adhesion Tester - SCALE 1; 0-3.5MPa / 0-500psi, with Calibration Cert

€1,346.85 €1,095.00
The Elcometer 106 Adhesion Tester is easy to operate and fully portable, and provides a numerical value for adhesion. Applications for the Elcometer 106 Adhesion Test include paint or plasma spray on bridge decking, coatings on steel, aluminium, concrete etc.
Availability: In stock
SKU
F106-C

Elcometer 106 Pull Off Adhesion Tester

The Elcometer 106 Adhesion Tester is easy to operate and fully portable, and provides a numerical value for adhesion. Applications for the Elcometer 106 Adhesion Test include paint or plasma spray on bridge decking, coatings on steel, aluminium, concrete etc.

  • Supplied in a carry case - ideal for site tests
  • Hand operated - no need for a power supply
  • Includes a cutter for EN13144 and ISO 4624 tests

Test Method

An adhesion test dolly is bonded to the coating using an adhesive. The Elcometer 106 adhesion tester houses a spring arrangement which applies a lift force to the dolly as the tension is increased.

When the coating is pulled off the surface, an indicator on the scale shows the numerical value of adhesion expressed in terms of the force per unit area required to remove the dolly.

Inspection of the dolly face is required to determine the failure mode.

To increase sensitivity at low values or for uneven surfaces, a 40mm (1.52”) dolly is available. When using the 40mm (1.52”) dolly, divide the scale reading by 4.

Technical Specification

Part Number Description Range
MPa (N/mm2) kg/cm2 psi
F106----5 Elcometer 106 Adhesion Tester - Scale 5 0 - 0.2 0 - 2 0 - 30
F106----1 Elcometer 106 Adhesion Tester - Scale 1 0 - 3.5 0 - 35 0 - 500
F106----2 Elcometer 106 Adhesion Tester - Scale 2 0 - 7.0 0 - 70 0 - 1000
F106----3 Elcometer 106 Adhesion Tester - Scale 3 0 - 15 0 - 150 0 - 2000
F106----4 Elcometer 106 Adhesion Tester - Scale 4 0 -22 0 - 220 0 - 3200
Dimensions Scales 1, 2, 5: 152 x 76mm (6 x 3”)    Scales 3 and 4: 150mm
Dolly Diameter 20mm (0.76”)
Dolly Area 314mm² (0.49 sq inch)
Gross weight of Kit Scale 1, 2 and 5: 2.1kg (4.7lb)  Scale 3: 3.4kg (7.5lb)  Scale 4: 3.6kg (8.0lb)
Certificate available Certificate of Calibration: issued for Fixed Calibration equipment and shows readings and traceability.
Packing List Elcometer 106 Pull Off Adhesion Tester, pack of 20 dollies, Araldite adhesive, base support ring,  magnetic dolly clamp, dolly cutter, ratchet spanner (scale 3 & 4 only), carry case and operating instructions


Can be used in accordance with:
AS 1580.408.5, ASTM D 4541, AS/NZS 1580.408.5, EN 13144, EN 24624, ISO 4624, ISO 16276-1, JIS K 5600-5-7, NF T30-062, NF T30-606

Standards in grey have  been superseded but are still recognised in some industries.

Accessories

T1062895-10 Spare Dollies 20mm (0.76”) Diameter (Pack of 10)
T1062895- Spare Dollies 20mm (0.76”) Diameter (Pack of 100)
T1062914- Large Dollies 40mm (1.52 Diameter (Pack of 5)
T1062915- Large Base Ring for 40mm (1.52")Dollies
T99912906 Araldite Epoxy Adhesive
T99914009 20mm (0.76") Dolly Cutter
Data Sheet
Browse Categories