Elcometer 331 Model THD Covermeter with Half Cell

€3,277.95 €2,665.00
This easy to use cover meter quickly and accurately locates, orientates and measures the depth of cover over reinforcement bars. Designed to meet IP65 this rugged waterproof cover meter can be used in the harshest of environments.
Availability: In stock
SKU
W331THD-4

Elcometer 331 Model THD Covermeter with Half Cell

This easy to use cover meter quickly and accurately locates, orientates and measures the depth of cover over reinforcement bars.

Designed to meet IP65 this rugged waterproof cover meter can be used in the harshest of environments.

User Friendly

  • Easy to transport and store
  • Ergonomically shaped case for comfort
  • Single handed operation: All functions can be accessed & controlled through 4 simple keys/buttons

Accurate

  • Locate and determine orientation of rebar quickly, easily & accurately
  • Up to 240,000 readings can be stored on the gauge for detailed reporting*
  • Memory and data logging with data output to PC or direct to printer*
  • Graph Plotting allows an immediate visual indication of results

Reliable

  • Stainless Steel rebars can be located by the THD Model
  • Battery packs can be charged in the unit or externally. Additional batteries allow continued use

Tough

  • Specifically designed for use on-site
  • Rugged, waterproof IP65 case provides protection against the elements
  • Backlit screen for viewing in dark environments

Efficient

  • Rebar locator, concrete covermeter and half-cell measurement all available in a single gauge - (selected models)
  • Intuitive menus enable each gauge to be used straight from the box

Powerful

  • Links to Covermaster™ software
  • Ultimate data management tool to store cover & half cell readings and produce professional reports
  • On Screen graphic display provides visual assessment of readings allowing identification of areas of low concrete cover or potential areas of corrosion

 

screen 1 

Cover Display Screen

Alternative / Typical Data Review Screen View

  • Backlit screens for use in dark conditions
  • Easy to use menus, in multiple languages to enable access to all data needed whilst on site without constant reference to the instruction book
  • Alternative view shows the typical display when using the deep cover search head
  • Bar size and depth of cover can be input manually to suit specific requirements
  • Typical data review screen clearly displays where readings are below or above a user specified tolerance, where a reading has not been taken
  • Units of measurement can be displayed in mm or inches for cover, or mV for Half-Cell 
 
screen 2
   
screen 3

Half-Cell Mode

Typical Screen View

  • Elcometer 331 Model BH/SH/TH/THD can read both Cover and Half-Cell Values
  • Elcometer 331 Model B can read Cover Values only
  • Data logging information displayed on screen
  • Menu soft keys are visible in Elcometer 331 Model SH and TH

 

 
screen 4

Graphics Plot Mod

  • eHalf-Cell Mode - the gauge indicates the areas with the most potential for corrosion
  • Covermeter mode - the gauge indicates the depth of cover
  • Black indicates most potential for corrosion
  • White indicates least potential for corrosion with varying greyscale shade in between
  • Zoom feature allows the user to take a closer look at different areas that are of interest

Threshold View

  • Ideal method for a simple pass or fail analysis
  • Once the threshold value has been set, anything before the value is shown in black, while anything over the value is shown in white
 
screen 5
   
screen 6

Autosizing and Orthogonal Function

  • Autosizing automatically estimates the size of rebar and the depth of cover
  • If this estimated figure differs greatly from your expected rebar size or you do not know the expected rebar size, the orthogonal size function provides an accurate measurement of bar size
  • The step by step directions for orthogonal function on the covermeter make the accurate sizing of bars quick and easy
 
 
screen 7

 

Data Logging Feature

  • Simple Data Management on the Elcometer 331 Models SH, TH and THD
  • The Elcometer 331 Model SH can store up to 10 batches of 1,000 cover or half-cell readings, with batch statistics, ready for evaluation and report generation using Covermaster™ software package
  • The Elcometer 331 TH and THD models have user definable memory batches with either linear or grid batch data logging modes. (Linear batching is where data is stored in a batch one reading after another)
  • Grid batches allow data to be stored in a 'spreadsheet format' with each cell relating to the survey area typically mapped out on the structure prior to inspection. The grid batch feature facilitates fast surveying for both cover and half-cell readings. Problem areas that do not fall within specification can be immediately identified and marked directly on the concrete
  • Cover and half-cell readings can be recorded and 'overlaid' in each grid location


Powerful Statistics Feature

  • Continually calculates and displays the statistical analysis of readings as they are taken. So, while the covermeter is in use, you are always informed and know exactly how your site survey is progressing
  • Statistics values are also calculated for the readings within each batch and these values are stored in the batch along with all individual readings

 

  • Fast and accurate: ◦Locate and determine orientation of rebar quickly, easily & accurately.
  • Large, easy to read backlit display: ◦For easy viewing in dark environments.
  • Interchangeable search heads: ◦Select from standard search head, narrow pitch search head, deep cover search head and borehole probe.
  • Single handed operation: ◦Most functions can be accessed & controlled through 4 simple keys.
  • Intuitive menus in multiple languages: ◦Allows use straight out of the box
  • International bar sizes: ◦User selectable bar sizes include metric, US Bar Numbers, ASTM/Canadian and Japanese for use anywhere in the world.
  • Rechargeable battery supply: ◦Battery packs can be charged inside or outside the gauge.
  • Ergonomically shaped case:
  • For ease of use and comfort, with a gentle curve to fit snugly against the hip.

Elcometer 3312 Models BH, SH, TH and THD are not supplied with a Search Head / Half Cell Probe as standard. Please select the required Search Head / Half Cell Probe required from the list below.