Fukuda EK-234P Multiline Self Levelling Laser (4V1H1P)

Our Fukuda EK-234P combines four vertical laser beams with one horizontal beam and a laser plumb. This 4V1H1P arrangement provides several upright references alongside a level line and a point reference for installation and setting-out work.

The additional vertical beams are useful when a layout involves alignment in several directions. You can position the instrument on a standard tripod, turn it through 360° and use the fine-motion knob to adjust the beam alignment. We also supply other cross-line and dot laser levels for tasks requiring fewer lines or a different combination of points and beams.

Fukuda EK-234P Multiline Laser References

The four vertical beams provide guides for checking upright alignment across the working area. The horizontal beam gives you a common height reference, while the laser plumb provides a point for positioning.

For interior fitting work, these references can help when marking wall fittings, aligning upright components or setting a consistent installation height. The choice of reference depends on what you are checking: a line guides alignment across a surface, while a point identifies a specific position.

Key features include:

• Vertical beams: four.
• Horizontal beam: one.
• Point reference: one laser plumb.
• Levelling: self-levelling operation.
• Laser modes: continuous and pulse.
• Instrument rotation: 360°.
• Alignment control: fine-motion adjustment knob.
• Mounting: standard tripod.
• Optional detector: FD-9 for pulse-mode detection indoors and outdoors.

The Fukuda EK-234P self-levelling laser brings these references together in one instrument. Its beam configuration suits work where a single vertical line would provide fewer alignment references than the task requires.

EK-234P Rotation and Fine Adjustment

Positioning the laser involves setting both its height and its direction. Tripod mounting helps establish the working height, while rotation lets you direct the beams towards the area being marked. Our tripods category includes options for different working heights and adjustment requirements.

After turning the instrument into position, use the fine-motion knob to make smaller alignment changes. This gives you a controlled way to bring a reference onto an existing mark.

The stated 360° rotation describes movement of the instrument. It does not describe continuous 360° coverage from each projected beam.

EK-234P Beam Detection and Model Comparison

The Fukuda EK-234P offers continuous output for visible line work and pulse output for use with the optional FD-9 detector. In pulse mode, the detector locates the beams indoors or outdoors when a visible reference is difficult to follow.

This provides two ways to work with the laser, depending on the lighting conditions and whether a detector is being used.

For a green-beam option with two vertical beams, one horizontal beam and a plumb reference, compare our Fukuda EK-226P-G multiline laser.

Order Your Fukuda EK-234P

Order your Fukuda EK-234P online, or call us on 01 801 1335 for advice on beam configurations, tripod selection and the optional FD-9 detector.