Fukuda FRD600G Universal Receiver for ALL Green Beam rotating lasers

Our Fukuda FRD600G laser receiver is a universal detector for green beam rotary lasers. It helps you locate the rotating laser reference during levelling and alignment work, with a large detection range and two selectable accuracy bands.

This universal laser receiver is suitable for green beam transmitters used across site and construction applications. As a rotating laser receiver, it includes a staff bracket for rod-mounted measurements and two magnetic mounting positions for attaching it to suitable metal surfaces. Browse our laser level receivers to compare other detection tools.

Fukuda FRD600G Detection and Accuracy Features

The Fukuda FRD600G laser receiver detects green rotary laser signals with a minimum detection diameter of 900m, depending on the transmitter and working conditions. Its 126mm detection sensor range helps acquire the beam as you move the receiver through the laser plane. The display provides a visible reference for identifying the detected position.

Choose fine detection at ±1mm when transferring a precise elevation, or coarse detection at ±5mm when locating the green beam quickly. The receiver automatically switches off after 15 minutes, helping preserve the 9V battery when it is left unused.

Key specifications include:

• Laser compatibility: green beam rotary laser transmitters.
• Detection range: minimum 900m diameter.
• Accuracy bands: fine ±1mm and coarse ±5mm.
• Detection sensor range: 126mm.
• Mounting: supplied staff bracket and two magnetic positions.
• Power: one 9V battery.
• Automatic shut-off: 15 minutes.
• Protection: IP54 full rubber-protected housing.

The rubber-protected housing helps protect the receiver during routine site use. Keep the unit within its specified environmental rating and close the battery compartment securely before work.

Using the Fukuda FRD600G Laser Receiver for Levelling

Set up the green beam rotary laser on a stable surface and allow it to establish the required reference plane. Switch on the receiver and face its detection window towards the transmitter. Move the receiver vertically when finding a horizontal reference, or sideways when locating a vertical plane. Use the display to identify the beam position, then select fine or coarse detection to suit the measurement.

With the Fukuda FRD600G laser receiver attached to a suitable staff, you can compare elevations and transfer a green laser reference between points. The fine band supports detailed levelling, while the coarse band helps you acquire the beam more quickly across the working area. For compatible transmitters, browse our rotary laser levels category.

The receiver is designed for use with green beam rotary lasers, so check the transmitter colour and operating instructions before starting. This is particularly important when a site uses multiple laser systems with different beam colours.

Mounting the FRD600G Receiver with Its Staff Bracket

The Fukuda FRD600G laser receiver includes a staff bracket for attaching it to a levelling staff. Secure the bracket, keep the staff plumb and move it between the required reference points. The two magnetic positions provide alternative attachment options when the receiver is being fixed to a suitable metal surface.

The receiver can also be held by hand for quick beam-finding or alignment checks. Browse our laser level accessories for additional staff and mounting equipment.

Order Your Fukuda FRD600G Laser Receiver

Order your Fukuda FRD600G receiver online, or call us on 01 801 1335 for advice on green beam compatibility, accuracy bands and staff mounting.