Fukuda FRD600R Universal Receiver for ALL Red Beam rotating lasers

Our Fukuda FRD600R laser receiver is a universal laser receiver for red-beam rotating lasers. It helps you locate the laser reference during levelling, alignment and elevation checks, with two accuracy bands for detailed positioning or faster beam acquisition.

As a rotating laser receiver, it is suitable for transmitters used across construction and site applications. It includes a staff bracket for rod-mounted measurements and two magnetic mounting positions for attachment to suitable metal surfaces. Browse our laser level receivers to compare other detection tools.

Fukuda FRD600R Detection and Display Features

The Fukuda FRD600R laser receiver detects red rotary laser signals with a minimum detection diameter of 900m, depending on the transmitter and working conditions. Its 126mm detection sensor range helps you acquire the beam as you move the receiver through the laser plane. The display provides a visible reference for identifying the detected position.

Select fine detection at ±1mm when transferring a precise elevation, or coarse detection at ±5mm when locating the red beam more quickly. The receiver switches off automatically after 15 minutes, helping conserve the 9V battery when it is not being used.

Key specifications include:

• Laser compatibility: red-beam rotating laser transmitters.
• Detection range: minimum 900m diameter.
• Accuracy bands: fine ±1mm and coarse ±5mm.
• Detection sensor range: 126mm.
• Mounting: supplied staff bracket and two magnetic positions.
• Power: one 9V battery.
• Automatic shut-off: 15 minutes.
• Protection: IP54 full rubber-protected housing.

The rubber-protected casing is designed for routine site use. Keep the receiver within its specified environmental rating and secure the battery compartment before beginning work.

Using the Fukuda FRD600R Laser Receiver for Levelling

Set up the red beam rotating laser on a stable surface and allow it to establish the required reference plane. Switch on the receiver and face its detection window towards the transmitter. Move the receiver vertically when finding a horizontal reference, or sideways when locating a vertical plane. Use the display to identify the beam position, then choose fine or coarse detection for the measurement.

With the Fukuda FRD600R laser receiver attached to a suitable staff, you can transfer elevations and compare reference points without relying solely on visual beam visibility. The fine band supports detailed levelling, while the coarse band helps locate the signal quickly across the working area. For compatible transmitters, browse our rotary laser levels category.

The receiver is intended for red beam rotating lasers, so check the transmitter colour and operating instructions before use. This helps avoid using the receiver with a laser that emits a different beam colour.

Mounting the FRD600R Receiver with Its Staff Bracket

The Fukuda FRD600R laser receiver includes a staff bracket for attaching it to a levelling staff. Secure the bracket, keep the staff plumb and move it between the required reference points. The two magnetic positions offer alternative attachment options when fixing the receiver to a suitable metal surface.

The receiver can also be held by hand for quick beam-finding and alignment checks. Browse our laser level accessories for additional staff and mounting equipment.

Order Your Fukuda FRD600R Laser Receiver

Order your Fukuda FRD600R receiver online, or call us on 01 801 1335 for advice on red beam compatibility, accuracy bands and staff mounting.