Fukuda FRE2020-2S Green Beam High Precision Dual Grade Laser with FRD808 Digital Receiver and FRR201DT Remote
€1,660.50
€1,350.00
Features:
Dual Grade laser with ±10% on the X-axis and ±10% on the Y-axis. Precision laser, Self Leveling Accuracy: ±15″ H level and ±15″ V level. Long Range, 250m Radius with FRD808 laser detector. FRR201DT Remote control distance, wireless 100m. Plumbs UP and Down. Self levels on it's side.
Availability:
In stock
SKU
FRE2020-2SG
Our Fukuda FRE2020-2SG provides level and sloped references for groundworks, concrete preparation and construction layout. This Fukuda green-beam dual-grade laser allows gradient adjustment on both the X and Y axes, supporting projects where falls are required in two directions.
We supply this green-beam version of the Fukuda FRE2020-2S with an FRD808 digital receiver and FRR201DT remote control. Part of our grade laser levels range, it combines slope control with horizontal and vertical self-levelling.
Fukuda FRE2020-2SG Grade Control and Specifications
This Fukuda dual grade laser provides adjustment from −10% to +10% on each axis. You can use these settings to establish references for surface falls, drainage gradients, and sloping concrete work.
Its key specifications include:
- Slope range: ±10% on the X-axis and ±10% on the Y-axis.
- Levelling accuracy: ±7.5mm at 100m.
- Self-levelling range: ±5°.
- Working radius: up to 250m with the FRD808 receiver.
- Laser beam: green, 520nm.
- Environmental protection: IP56-rated housing.
- Battery: 3.7V, 8,000mAh lithium battery.
- Operating time: approximately 30 hours.
The working radius allows you to take readings across a broad area from one instrument position. Use the receiver to detect the beam during outdoor levelling and grade checks.
Fukuda FRE2020-2SG Vertical Alignment and Plumb References
The FRE2020-2SG self-levels in horizontal operation and when positioned on its side for vertical work. Upward and downward plumb references support positioning and transferring points during layout.
Scanning settings allow you to direct the beam across a selected area. The listed scan angles include 10°, 45°, 90° and 180°, giving you options for concentrating the reference where you are working.
We can help you select suitable tripods for the working height and setup your application requires.
Fukuda FRE2020-2SG Receiver and Remote Control
The supplied FRD808 digital receiver helps you locate the laser reference and check elevations. Pair it with a suitable levelling staff to compare readings across your working area.
The FRR201DT remote provides control at distances up to 100m, allowing adjustments from a distance when access to the instrument is inconvenient.
For a red-beam alternative, compare our Fukuda FRE203X-2S dual grade laser, supplied with an FRD800 digital receiver and remote control.
Order Your Fukuda FRE2020-2SG
Order your Fukuda FRE2020-2SG online, or call us on 01 801 1335 for advice on dual-grade work, receiver use, and compatible accessories.