Fukuda MW99TR 3D Red Laser - 3 precise 360 degree full plane coverage - Rechargeable

The Fukuda MW99TR 3D red laser projects one 360° horizontal plane and two 360° vertical planes. These full-plane references support levelling, squaring and alignment across an indoor working area.

The Fukuda MW99TR 3D red laser is intended mainly for interior layout and installation tasks where continuous line coverage is useful. Browse our cross-line and dot laser levels category to compare related equipment.

Fukuda MW99TR 3D Red Laser Planes and Specifications

The two vertical planes are positioned at 90° to each other, creating perpendicular references around the instrument. The horizontal plane provides a continuous level line across the surrounding surfaces.

Key specifications include:

• Laser planes: one 360° horizontal and two 360° vertical.
• Vertical plane arrangement: 90° to each other.
• Accuracy: ±1.5mm at 5m.
• Levelling range: approximately ±2.5°.
• Operating temperature: −10°C to +45°C.
• Environmental protection: IP54.
• Power supply: 2600mAh Li-ion rechargeable battery.
• Operating time: more than 15 hours.
• Tripod threads: 1/4-inch and 5/8-inch.

The Fukuda MW99TR 3D red laser can be used as a Fukuda MW99TR laser level for establishing level planes and vertical alignment references without repositioning the instrument for each wall.

Fukuda MW99TR Self-Levelling and Line Control

A gravity pendulum self-levelling system establishes the laser planes when the unit is within its levelling range. If the instrument moves outside this range, the beams flash to indicate that the setup requires correction.

The vertical planes provide perpendicular lines for squaring and alignment. You can lock the lines when a sloping reference is needed for a particular layout task, giving the Fukuda MW99TR self-levelling laser added flexibility.

Fukuda MW99TR Rechargeable Operation and Receiver Mode

The rechargeable Li-ion battery supports more than 15 hours of operation under the listed conditions. A transport lock helps protect the pendulum when the instrument is switched off and moved between work areas.

Pulse receiver mode can extend the working range to up to 60m when paired with the optional FD-9 receiver. The 1/4-inch and 5/8-inch tripod threads also support different mounting arrangements.

Fukuda MW99TR Related Models and Accessories

For a hybrid system with green cross-lines and five red dots, compare our Fukuda FDG232-2G5R hybrid laser. For five red dots with one vertical and one horizontal line, see the Fukuda FDG232R red beam laser.

You can also browse our laser level accessories for receivers, wall brackets, targets, goggles and other setup equipment.

Order Your Fukuda MW99TR

Order your Fukuda MW99TR 3D red laser online, or call us on 01 801 1335 for advice on full-plane coverage, indoor layout and compatible accessories.