Total Stations / Theodolites
Shop By
Shopping Options
Accurate survey work starts with the right instrument. Celtic Surveys supplies total stations, theodolites, and professional survey accessories for construction setting out, engineering surveys, land measurement, alignment work, and site control. Whether you are checking angles, setting out points, measuring distances, or building a reliable control setup, this range supports the daily work of surveyors, engineers, contractors, and site teams across Ireland.
The Total Stations / Theodolites range includes precision instruments as well as the supporting equipment needed to use them correctly on site. Alongside total stations and electronic theodolites, you will find prisms, target plates, reflective sheets, prism poles, tripods, bipods, tribrachs, and prism adaptors. Each part of the setup plays a role in measurement accuracy, instrument stability, and repeatable fieldwork.
Total Stations and Theodolites for Accurate Site Measurement
Total stations and theodolites are used where accuracy, alignment, and control matter. They help construction and surveying teams establish lines, check angles, set out positions, monitor fixed points, and verify site measurements with confidence. The best choice depends on the type of work being carried out, the level of accuracy required, and whether the job needs angle-only measurement or a more complete angle and distance measurement workflow.
A dependable setup is not only about the main instrument. A stable tripod, correctly matched prism, secure tribrach, clear target, and suitable prism pole can all affect the quality of the final measurement. Celtic Surveys brings these instruments and accessories together so professionals can build a complete surveying setup around the way they work on site.
Total Stations for Setting Out, Survey Control, and Site Layout
Total stations are ideal for survey and construction tasks that require both angle measurement and distance measurement. They are commonly used for construction setting out, land surveying, site control, engineering works, alignment checks, roadworks and general site layout. By combining angular measurement with electronic distance measurement, a total station allows users to set out points, check positions, and manage survey control more efficiently.
Celtic Surveys supplies Stonex total stations for professional survey and construction use, with options suited to different workflows, site conditions, and measurement requirements. Depending on the task, users may need robotic, android, mechanical, or reflectorless functionality. A total station can also be paired with prisms, prism poles, tripods and tribrachs for a stable and repeatable field setup. For dedicated instrument options, explore the Total Stations range.
Theodolites for Precise Angle Measurement
Theodolites are designed for accurate horizontal and vertical angle measurement. They are a practical choice for alignment work, setting out angles, checking straight lines, confirming verticality, and carrying out simpler site measurement tasks where full distance measurement is not the main requirement.
Celtic Surveys supplies Pentax electronic theodolites for professional use in construction, engineering, and survey environments. Electronic theodolites offer clear digital readings, helping teams work efficiently while maintaining reliable angular accuracy. They are especially useful where a team needs a robust angle-measurement instrument without the additional functions of a total station. When used with a stable tripod and suitable setup accessories, a theodolite remains a valuable instrument for many field applications. For angle-focused site measurement, browse the Theodolites range.
Prisms, Targets, and Reflective Sheets for Measurement Work
Prisms and targets give total stations a defined point to measure to. They support setting out, site control, monitoring, reference checks, and repeat measurement work. Celtic Surveys supplies standard survey prisms, mini prisms, target plates, rail targets, and reflective sheets to suit different measurement conditions and site requirements.
A standard prism is often used for general survey and construction setting out, while mini prisms are useful where a smaller or more compact target is preferred. Reflective target sheets and fixed target plates can help with monitoring points, short-range measurements, and repeat reference locations. These accessories allow survey teams to improve visibility, maintain consistency, and work more efficiently across the site. For target-based measurement equipment, see Prisms and Retro / Reflective Sheets.
Tripods, Bipods, and Prism Poles for Stable Field Setups
Instrument stability has a direct effect on survey accuracy. Even a high-quality total station or theodolite needs a secure base to perform properly. Survey tripods provide that base, helping users mount instruments safely and maintain stable positioning during measurement work. Depending on the instrument and working conditions, users may need a lightweight tripod, a heavy-duty tripod, or an elevating tripod.
Prism poles are used to hold prisms and targets at measured heights, making them essential for setting out and field measurement work. Surveying bipods add further support by keeping prism poles steady during repeated readings, longer observations, or work in exposed areas. Together, these accessories improve setup speed, reduce movement, and support more repeatable results. To complete your field setup, browse Tripods, Prism Poles, and Surveying Bipods.
Tribrachs, Prism Adaptors and Carriers for Accurate Mounting
Tribrachs, prism adaptors and carriers help surveyors mount, centre and position instruments or targets accurately over a survey point. This is especially important for control work, repeated station setups, and measurement tasks where small setup errors can affect the final result.
Celtic Surveys supplies tribrachs and related mounting accessories for total stations, prisms, and other surveying equipment. Options may include optical or laser plummets, depending on the setup required. These accessories help users centre equipment over known points, maintain secure mounting, and improve confidence in the survey setup. Prism adaptors and carriers also help connect targets, poles, and mounting systems correctly. For centring and mounting equipment, see Tribrachs & Prism Carriers.
Choosing the Right Survey Equipment Setup
Choosing the right equipment starts with the work you need to complete. A theodolite may be suitable when the main requirement is accurate horizontal and vertical angle measurement. A total station is usually the stronger choice when the job also involves distance measurement, setting out, control work, or a more complete site measurement workflow.
It is also important to consider working range, accuracy requirements, instrument durability, site conditions, and compatibility with existing accessories. The correct tripod, prism, pole, tribrach, or reflective target can make a major difference to how efficiently the instrument performs on site. Celtic Surveys can help customers match instruments and accessories to real working conditions, whether they are building a new setup or replacing key parts of an existing one.
Order Total Stations, Theodolites, and Survey Accessories from Celtic Surveys
Celtic Surveys supplies total stations, theodolites, and survey accessories for professional setting out, angle measurement, site control, alignment, and field measurement work. The range includes instruments for survey and construction use, along with prisms, tripods, prism poles, bipods, tribrachs, adaptors, carriers, and reflective targets to support complete site setups.
Need help choosing the right total station, theodolite, prism, tripod, tribrach, or survey accessory for your site? Contact Celtic Surveys for practical advice on professional surveying equipment. Call 01 801 1335 or email sales@celticsurveys.ie to discuss the best option for your surveying, setting out or site measurement work.