The Elcometer 270 pinhole detector utilises the wet sponge technique and has been designed to set a new standard for wet sponge detectors - a high quality, low voltage detector with similar accessories to a high voltage spark tester.
The Elcometer 270 pinhole detector utilises the wet sponge technique and has been designed to set a new standard for wet sponge detectors - a high quality, low voltage detector with similar accessories to a high voltage spark tester.
Model | Elcometer 270/3 | Elcometer 270/2 | Elcometer 270/4 |
Part Number | D270----3 | D270----2 | D270----4 |
Voltage | 9V and 90V | 67.5V | 9V, 67.5V and 90V |
Maximum Measurement Range | 500µm (20mils) | 500µm (20mils) | 500µm (20mils) |
Sensitivity | 9V: 90kΩ ±5% 90V: 400kΩ ±5% |
125kΩ ±5% | 9V: 90kΩ ±5% 67.5V: 125kΩ ±5% 90V: 400kΩ ±5% |
Battery Life (continuous use) | 9V: up to 200 hours 90V: up to 80 hours |
Up to 100 hours | 9V: up to 200 hours 67.5V: up to 100 hours 90V: up to 80 hours |
Battery Type | 3 x AA (LR1600) 1.5V alkaline (NiMH rechargeable batteries can also be used, battery life will be reduced by up to 75%) |
||
Accuracy of Setting | ±5% | ||
Dimensions | Without Wand 210 x 42 x 37mm (8.3 x 1.7 x 1.5”) | ||
Standard Wand 175mm (6.9”) long (including sponge) | |||
Flat Sponge 175mm (6.9”) long (including sponge) | |||
Weight | 610g (21oz) including wand, cable and batteries | ||
Certificate available | Certificate of Calibration: issued for Fixed Calibration equipment and shows readings and traceability | ||
Packing List | Pinhole Detector, standard wand and flat sponge, 4m (13 2”) return lead with crocodile clip, 3 x LR1600 (AA) batteries and operating instructions |